Features of GI SERIES

GI SYSTEM Construction process management system


Spindle I.D. 175 mm
Spindle rotation speed Low speed 6~34min-1
High speed 12~69min-1
Spindle rotation torque 21.2~71.2 kN・m(2,166~7,265 kgf・m)
Max. pull down 132.5 kN(13,500 kgf)
Feed stroke 5,500 mm(Max. column length 20 m)
Feed speed 0~3.0(rapid feed 4.5) m/min
Leader slide stroke 2,000 mm
Leader swing Left and right 3 degrees each
Winch 9.8(⌀10 x 30m)kN
Dimension when transportation(L x W x H) 8,830 mm x 2,595 mm x 3,050 mm
Gross weight when transportation 24,000 kg (main body)
24,750 kg (when transportation: including WH6S water swivel, telescopic rod guide and rod 3.0m)
27.050 kg (when Max. column length: including rods 22m and bit 1.5m)
Ground pressure 83.3 kPa(main body)
Engine unit Diesel engine 102.1 kW/(2,200 min-1)
Required hydraulic power source Rotation:30.9 MPa{315 kgf/cm2}- 350 L/min
Feed:12.8 MPa{130 kgf/cm2}-66 L/min
Max. column diameter ⌀1,600 mm
Standard accessories Construction process management system
Depth meter(feed, slide)
Outriggers(front and rear each 2)
Pull down force measuring cylinder
Telescopic rod guide
Rear camera
Optional accessories Auxiliary camera
Sub monitor

The specifications are subject to change without prior notice.