> Home > Products > Jet Grouting Machines > YBM-2PSII
> SI-15SII > SI-40SIII > YBM-2PSII
> CLH-150II > CLH-220S
 
YBM-2PSII
YBM-2PSII  
ROTARY HEAD
Type : Through hole spindle with hydraulic chuck
Spindle Inner Diameter : 43 mm
Rotation Speed : 7, 20, 37, 115 rpm
Rod Chuck System : Hydraulic chuck
Rod turning angle : 360o
FEED SYSTEM
Drive System : Twin Hydraulic Cylinder
Feed Stroke : 500 mm
Max. Thrust Force ( Pull Down ) : 16.5 kN ( 3,700 lbf )
Max. Balance Force ( Pull Up ) : 23.9 kN ( 5,370 lbf )
TRANSMISSION
Number of Gear Speed : 4 Speeds, FWD
Gear Change Device : Sliding Gear
Clutch : Single plate dry disk type
STEPPING DEVICE
Step distance ( Pitch )-adjustable : Minimum : 25 mm/step
Step time ( Interval )-adjustable : 1 to 999 seconds
HYDRAULIC UNIT
Oil Pump : Variable discharge piston pump
Rated Discharge Pressure : 13.7 MPa ( 1,990 psi )
Feed pressure : 4.9 MPa ( 710 psi )
Chuck pressure : 7.3 MPa ( 1,060 psi )
PRIME MOVER
Electric motor : 7.5 kW - 4P
DIMENSION & WEIGHT
Dimension ( L x W x H ) : 1,600 x 800 x 1,610
Weight : 720 kG ( 1,600 lbs )
 
Above specifications are subject to change without prior notice